|
Cat No |
Description |
Function |
|
FP-016
|
Fire Output Relay
|
Incorporates a red LED which illuminates when the relay is active. The fire output relay is connected to a control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets and rollershutter doors.
|
|
FPA-014
|
Remote Detector Indicator
|
Incorporates a red LED that is clearly visible when active. The remote detector indicator’s primary use is to indicate the activation of an out-of-sight smoke or heat detector.
|
|
FPA-198
|
Keyswitch Auxiliary Device Isolator
|
Allows a +24V d.c. output from a fire panel to be remotely isolated to prevent external equipment such as autodiallers and rollershutter doors from operating. This is a particularly useful function during routine maintenance as it safeguards against the inadvertent triggering of auxiliary equipment. The unit incorporates an isolating keyswitch and amber LED.
|
|
FPA-199
|
24V 5A Keyswitch with Buzzer
|
Combines the functions of the FP-016 relay and FPA-198 device isolator in one unit. It is a double-pole 24V 5A polarised relay with a keyswitch isolation facility allowing its relay operation to be temporarily disabled from the fire alarm signal during routine test and maintenance, preventing autodiallers and water sprinklers from activating.
|
|
FPA-304
|
Auto-Dialler (Less SIM Card)
|
The auto-dialler short message communicator provides a cost-effective, easy-to-install solution for signalling alarm and other system conditions by sending an SMS text message to the user via GSM technology. Suitable for use with a prepaid SIM card (not included), the unit ensures that key people are contacted when there is a status change in the system, enabling fast incident response.
|
|
FPA-311
|
Red Auxiliary Isolator
|
A 24V d.c. changeover auxiliary relay with an isolating key switch which can be used to isolate or energise the relay. The unit is suitable for switching up to 250V a.c. and incorporates an 8A, double-pole relay housed in a red fireresistant ABS enclosure. Fitted with an LED indicator and optional integral buzzer, the change-over relay is particularly useful for the disablement of existing circuits, zones and sounder circuits.
|
|
FPA-312
|
White Auxiliary Isolator
|
Same as the FPA-311, but housed within a white enclosure.
|
|
FPA-547
|
Mains Voltage Isolator Switch
|
Provides a secure method of isolation for fire alarm mains supply Voltage in accordance with the recommendations of BS 5839 Pt1: 2017 25.2 for mains power supplies. The supply is isolated by means of a key switch and an LED indicates the supply of power.
|
|
FPA-593
|
24V Vibrating Pad c/w Locking Jack Plug
|
Used to provide early warning of a potential fire alarm condition to the hard of hearing. Connected via the FPA -594 wall mounting socket to any conventional fire alarm sounder circuit, the socket is monitored by the fire alarm system control panel.
|
|
FPA-594
|
Single Gang Locking Jack Socket
|
For use with FPA -593.
|
|
FPA-648
|
Fire Alarm and Emergency Lighting Log Book
|
Meets the test record requirements of BS5839 and the legal obligations under the Regulatory Reform Order. The log book includes sections to include details of the fire alarm system, service and activation details as well as staff training, drills, emergency lighting and much more.
|
|
FPA-662
|
Bardic Remote Detector Indicator
|
Same function as FPA-014.
|
|
FPA-670
|
Bardic fire and fault relay
|
An optional 2-Way relay PCB that supports fire and fault conditions. The PCB is connected to the Main PCB via a connector.
|
|
FPA-674
|
Bardic Fire Output Relay
|
Performs functions similar to FP-016 but doesn't feature an indication LED.
|
|
FPA-712
|
Lockable Steel Document Enclosure
|
A key lockable, robust steel enclosure for the safe storage of important documents such as the fire alarm panel user manuals and test log book. The enclosure has ample room to hold documents up to A4 size.
|
|
FPA-996
|
4 Zone Monitored Sounder Extender
|
Provides four extra sounder circuits with open and short circuit fault monitoring. It is compatible with most fire alarm control panels and is supplied mounted on a double gang plate which fits standard UK 25mm-deep back boxes.
|
|
Cat No
Description
Function
|
FP-016
Fire Output Relay
Incorporates a red LED which illuminates when the relay is active. The fire output relay is connected to a control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets and rollershutter doors.
|
|
Cat No
Description
Function
|
FPA-014
Remote Detector Indicator
Incorporates a red LED that is clearly visible when active. The remote detector indicator’s primary use is to indicate the activation of an out-of-sight smoke or heat detector.
|
|
Cat No
Description
Function
|
FPA-198
Keyswitch Auxiliary Device Isolator
Allows a +24V d.c. output from a fire panel to be remotely isolated to prevent external equipment such as autodiallers and rollershutter doors from operating. This is a particularly useful function during routine maintenance as it safeguards against the inadvertent triggering of auxiliary equipment. The unit incorporates an isolating keyswitch and amber LED.
|
|
Cat No
Description
Function
|
FPA-199
24V 5A Keyswitch with Buzzer
Combines the functions of the FP-016 relay and FPA-198 device isolator in one unit. It is a double-pole 24V 5A polarised relay with a keyswitch isolation facility allowing its relay operation to be temporarily disabled from the fire alarm signal during routine test and maintenance, preventing autodiallers and water sprinklers from activating.
|
|
Cat No
Description
Function
|
FPA-304
Auto-Dialler (Less SIM Card)
The auto-dialler short message communicator provides a cost-effective, easy-to-install solution for signalling alarm and other system conditions by sending an SMS text message to the user via GSM technology. Suitable for use with a prepaid SIM card (not included), the unit ensures that key people are contacted when there is a status change in the system, enabling fast incident response.
|
|
Cat No
Description
Function
|
FPA-311
Red Auxiliary Isolator
A 24V d.c. changeover auxiliary relay with an isolating key switch which can be used to isolate or energise the relay. The unit is suitable for switching up to 250V a.c. and incorporates an 8A, double-pole relay housed in a red fireresistant ABS enclosure. Fitted with an LED indicator and optional integral buzzer, the change-over relay is particularly useful for the disablement of existing circuits, zones and sounder circuits.
|
|
Cat No
Description
Function
|
FPA-312
White Auxiliary Isolator
Same as the FPA-311, but housed within a white enclosure.
|
|
Cat No
Description
Function
|
FPA-547
Mains Voltage Isolator Switch
Provides a secure method of isolation for fire alarm mains supply Voltage in accordance with the recommendations of BS 5839 Pt1: 2017 25.2 for mains power supplies. The supply is isolated by means of a key switch and an LED indicates the supply of power.
|
|
Cat No
Description
Function
|
FPA-593
24V Vibrating Pad c/w Locking Jack Plug
Used to provide early warning of a potential fire alarm condition to the hard of hearing. Connected via the FPA -594 wall mounting socket to any conventional fire alarm sounder circuit, the socket is monitored by the fire alarm system control panel.
|
|
Cat No
Description
Function
|
FPA-594
Single Gang Locking Jack Socket
For use with FPA -593.
|
|
Cat No
Description
Function
|
FPA-648
Fire Alarm and Emergency Lighting Log Book
Meets the test record requirements of BS5839 and the legal obligations under the Regulatory Reform Order. The log book includes sections to include details of the fire alarm system, service and activation details as well as staff training, drills, emergency lighting and much more.
|
|
Cat No
Description
Function
|
FPA-662
Bardic Remote Detector Indicator
Same function as FPA-014.
|
|
Cat No
Description
Function
|
FPA-670
Bardic fire and fault relay
An optional 2-Way relay PCB that supports fire and fault conditions. The PCB is connected to the Main PCB via a connector.
|
|
Cat No
Description
Function
|
FPA-674
Bardic Fire Output Relay
Performs functions similar to FP-016 but doesn't feature an indication LED.
|
|
Cat No
Description
Function
|
FPA-712
Lockable Steel Document Enclosure
A key lockable, robust steel enclosure for the safe storage of important documents such as the fire alarm panel user manuals and test log book. The enclosure has ample room to hold documents up to A4 size.
|
|
Cat No
Description
Function
|
FPA-996
4 Zone Monitored Sounder Extender
Provides four extra sounder circuits with open and short circuit fault monitoring. It is compatible with most fire alarm control panels and is supplied mounted on a double gang plate which fits standard UK 25mm-deep back boxes.
|