Kandel

Kerriled

Larino

LED Control Gear for Emergency Lighting

Nickel Cadmium Batteries

Nickel Metal Hydride Batteries

Single & Multiple Array LED Mains Drivers

LED Control Gear for Central Systems

Fluorescent Central System Inverters

CBU AC/DC Central Battery Systems

LPAC Single Phase Static Inverters

HPAC Single Phase Static Inverters

HPAC Three Phase Static Inverters

Mini Sine Compact Static Inverter

Change-Over & Sub-Circuit Monitor Relay

CFP Fire Alarm Panels

Series 65 Detectors

Hochiki CDX Detectors

Vision Detectors

Optical Beam Smoke Detectors

Valve-Regulated Lead Acid Batteries

Electromagnetic Door Retainers

Fire & Safety Signage

Twin-Flex Pro Fire Alarm Panels

Twin-Flex Pro Ancillaries

CFP Two-Wire Fire Alarm Panels

AlarmSense® Two-Wire Devices

XFP Fire Alarm Panels

MxPro5 Fire Alarm Panels

CIE-A 200 Fire Alarm Panel

Hush Button

Sentri Addressable Devices

Sita Devices

XP95® Addressable Devices

Discovery® Addressable Devices

Xpander® Addressable Devices

Hochiki ESP Intelligent Addressable Devices

Zerio Plus Fire Alarm Panels

Zerio Plus Wireless Devices

Disabled Toilet Alarms

Loop-Wired Disabled Refuge System

Conventional Call System

Addressable Call System

Stainless Steel Ancillaries

Dementia Care System

Induction Loop Systems

Gas Suppression Equipment

Intrinsically Safe Solutions

Fire-Cryer® Voice Alarms

Titanus® Air Sampling Smoke Detection

Window Ventilation Systems

Linear Heat Detection

Water Leakage Detection

Addressable Call System

Easy to install and expand multi-purpose addressable call system

Addressable Call System

Easy to install and expand multi-purpose addressable call system

Enquire Now

Key Features

Multiple call levels including standard, ensuite, help required, emergency, attack, presence & attendance
Wide range of system components including programmable call points, ceiling pulls, monitoring points, displays, infrared ceiling receivers, radio receivers, staff attack transmitters and neck pendants, overdoor lights and sounders
Flexible call routing; system can be tailored to suit a site’s exact operational requirements, whatever they may be
Call accept feature saves valuable time by preventing more than one member of staff responding to the same call
Automatic call divert transfers any unanswered calls to other areas to ensure they are responded to within a predetermined time
Follow-me lights illuminate overdoor lights and corridor lights in sequence to visually guide staff to the source of a call
Staff presence helps managers, matrons and carers locate their colleagues by showing where they are working at any given time
Staff attendance allows staff entering rooms to log their ‘attendance’ via an infrared call point or ceiling receiver
Call follower sounders inform staff that other calls are waiting by sounding an optional soft tone in all occupied rooms
Night mode allows the system to work in a totally different way at night, providing for fewer staff and reduced sound levels
Infrared security transmitters can help protect staff against disturbed patients, intruders and aggressive visitors
Surveyor data analysis software allows managers to output custom reports to a desktop PC on data such as longest calls, busiest shifts, most visited rooms etc
Optional alphanumeric and tone-only paging facilities are available for carers on the move
Device monitoring constantly supervises all network devices and informs you of any problems, reducing maintenance time and costs
Laptop programmable system controller allows the system to adapt to your changing requirements without the need for expensive rewiring
Easy to install and expand
Universal programming devices allow optional third-party switch assemblies to be interfaced to the system for optional compliance with HTM 08-03
Tried, trusted & respected by large NHS trusts to renowned nursing home groups

Variants

Description

	Cat No	Description
	FPA-406	Recessing bezel to suit ONC-020 Controller
	ONC-001	Slave Ceiling Pull Unit
	ONC-002	Overdoor Light c/w Sounder
	ONC-003	Call Point c/w Remote Socket & Button Reset
	ONC-020	Call System Controller (requires 2 x 7Ah batteries)
	ONC-021	Upload/Download Programming Software & Lead (Windows XP/Vista/7)
	ONC-022	Corridor Display with Controls _{Also available for use on conventional and dementia care call systems}
	ONC-023	Corridor Display without Controls
	ONC-024	Slave Overdoor Light _{Also available for use on conventional and dementia care call systems}
	ONC-025	Call Point c/w Remote Socket & Magnetic Reset
	ONC-027	Call Point c/w Button Reset (Without Remote Socket)
	ONC-028	Call Point c/w Magnetic Reset (Without Remote Socket)
	ONC-029	Monitoring Point c/w Button Reset
	ONC-030	Master Infrared Ceiling Receiver
	ONC-031	Slave Infrared Ceiling Receiver
	ONC-032	Mk2 (868MHz) Radio Receiver (Compatible with ONC-033 Transmitter Only)
	ONC-033	Infrared/Radio Staff Attack Transmitter (Push/Pull for Attack) _{Also available for use on conventional and dementia care call systems}
	ONC-034	Single Way Charging Unit to suit ONC-033 Transmitter _{Also available for use on conventional call system}
	ONC-035	Ten Way Charging Unit to suit ONC-033 Transmitter _{Also available for use on conventional call system}
	ONC-037	Surveyor Data Management Software c/w Wall Socket and Lead (Windows XP/Vista/7)
	ONC-038	Network Splitter
	ONC-080	Infrared/Radio Transmitter (Push for Call/Pull for Attack) _{Also available for use on conventional call system}
	ONC-081	Zone Specific Relay Output Device
	ONC-082	Extension Aerial to suit ONC-032
	ONC-083	RF Integrity ‘Monitored Heartbeat’ Transmitter (at least 1 per ONC-032 required)
	ONC-084	Infrared/Radio Patient Neck Pendant c/w Lanyard (Push for Call)
	ONC-085	Infrared/Radio Patient Wrist Pendant c/w Wrist Strap (Push for Call)
	ONC-086	Infrared/Radio Attendance Pendant c/w Lanyard (Push for Attendance)
	ONC-090	Hand/Foot Pneumatic Pad (Requires ONC-091) _{Also available for use on conventional call system}
	ONC-091	Remote Air Switch to suit ONC-090 (Connects to ONC-003, ONC-044 or ONC-046) _{Also available for use on conventional call system}
	ONC-092	Portable Movement Detector (Connects to ONC-003, ONC-044 or ONC-046) _{Also available for use on conventional call system}
	ONC-093	Double Remote Jack Socket (Allows 2 Ancillary Calling Devices to be Connected) _{Also available for use on conventional call system}
	ONC-094	Floor Pressure Mat (Connects to ONC-003, ONC-044 or ONC-046)
	ONC-096	Configurator Adaptor c/w Lead and Software
	ONC-097	High Output 85dB Addressable Sounder
	ONC-100	Call Point with Sounder, IR Receiver & Button reset with remote socket

	Cat No Description	FPA-406 Recessing bezel to suit ONC-020 Controller
	Cat No Description	ONC-001 Slave Ceiling Pull Unit
	Cat No Description	ONC-002 Overdoor Light c/w Sounder
	Cat No Description	ONC-003 Call Point c/w Remote Socket & Button Reset
	Cat No Description	ONC-020 Call System Controller (requires 2 x 7Ah batteries)
	Cat No Description	ONC-021 Upload/Download Programming Software & Lead (Windows XP/Vista/7)
	Cat No Description	ONC-022 Corridor Display with Controls _{Also available for use on conventional and dementia care call systems}
	Cat No Description	ONC-023 Corridor Display without Controls
	Cat No Description	ONC-024 Slave Overdoor Light _{Also available for use on conventional and dementia care call systems}
	Cat No Description	ONC-025 Call Point c/w Remote Socket & Magnetic Reset
	Cat No Description	ONC-027 Call Point c/w Button Reset (Without Remote Socket)
	Cat No Description	ONC-028 Call Point c/w Magnetic Reset (Without Remote Socket)
	Cat No Description	ONC-029 Monitoring Point c/w Button Reset
	Cat No Description	ONC-030 Master Infrared Ceiling Receiver
	Cat No Description	ONC-031 Slave Infrared Ceiling Receiver
	Cat No Description	ONC-032 Mk2 (868MHz) Radio Receiver (Compatible with ONC-033 Transmitter Only)
	Cat No Description	ONC-033 Infrared/Radio Staff Attack Transmitter (Push/Pull for Attack) _{Also available for use on conventional and dementia care call systems}
	Cat No Description	ONC-034 Single Way Charging Unit to suit ONC-033 Transmitter _{Also available for use on conventional call system}
	Cat No Description	ONC-035 Ten Way Charging Unit to suit ONC-033 Transmitter _{Also available for use on conventional call system}
	Cat No Description	ONC-037 Surveyor Data Management Software c/w Wall Socket and Lead (Windows XP/Vista/7)
	Cat No Description	ONC-038 Network Splitter
	Cat No Description	ONC-080 Infrared/Radio Transmitter (Push for Call/Pull for Attack) _{Also available for use on conventional call system}
	Cat No Description	ONC-081 Zone Specific Relay Output Device
	Cat No Description	ONC-082 Extension Aerial to suit ONC-032
	Cat No Description	ONC-083 RF Integrity ‘Monitored Heartbeat’ Transmitter (at least 1 per ONC-032 required)
	Cat No Description	ONC-084 Infrared/Radio Patient Neck Pendant c/w Lanyard (Push for Call)
	Cat No Description	ONC-085 Infrared/Radio Patient Wrist Pendant c/w Wrist Strap (Push for Call)
	Cat No Description	ONC-086 Infrared/Radio Attendance Pendant c/w Lanyard (Push for Attendance)
	Cat No Description	ONC-090 Hand/Foot Pneumatic Pad (Requires ONC-091) _{Also available for use on conventional call system}
	Cat No Description	ONC-091 Remote Air Switch to suit ONC-090 (Connects to ONC-003, ONC-044 or ONC-046) _{Also available for use on conventional call system}
	Cat No Description	ONC-092 Portable Movement Detector (Connects to ONC-003, ONC-044 or ONC-046) _{Also available for use on conventional call system}
	Cat No Description	ONC-093 Double Remote Jack Socket (Allows 2 Ancillary Calling Devices to be Connected) _{Also available for use on conventional call system}
	Cat No Description	ONC-094 Floor Pressure Mat (Connects to ONC-003, ONC-044 or ONC-046)
	Cat No Description	ONC-096 Configurator Adaptor c/w Lead and Software
	Cat No Description	ONC-097 High Output 85dB Addressable Sounder
	Cat No Description	ONC-100 Call Point with Sounder, IR Receiver & Button reset with remote socket

Addressable Call System Operation
This powerful yet easy to use addressable call system helps ensure vital communication throughout a building. In environments where efficiency is paramount, the system delivers, helping save staff time, minimising disturbance and improving the quality of patient, customer and/or employee care.
Recently updated to include a host of new features, the way the system operates can be tailored to suit a care facility’s specific requirements. For example, different day, night and call divert arrangements can be easily accommodated to meet the exact operational needs and precise layout of any building.

Choosing & Planning a System
The flexibility of the system, coupled with many other advanced features such as multiple call levels, free in-built datalogging, simple system reprogramming and full monitoring of all network devices, makes this addressable system the obvious choice for nursing homes, hospitals, health centres and many other private and public sector establishments.
Up to 255 addressable devices (and an even larger number of slave and ancillary devices) can be connected to the system. In practice, systems can range from having just a handful of addressable devices (for example, a building that requires communication facilities in its disabled persons toilet only) to systems with in excess of 200 devices such as buildings requiring nursecall and infrared staff protection facilities.
As all addressable devices are soft addressed, no consideration needs to be given to how they will interact until system programming. System wiring, however, must be made in a ‘spine’ and ‘limb’ configuration using one or more network splitters. A point also worth taking into consideration is that indicator panels should always be sited internally in a clean dry area which is readily accessible to staff.

Specification / Technical Information

In its simplest form, an addressable call system:

Allows the general public, a member of staff or a patient to call for assistance
Confirms that the call has got through
Makes sure the caller is visited
If required, allows extra or more urgent assistance to be summoned using an optional ‘emergency’ call facility

Using the wide variety of options available, the system can also:

Informs staff that someone is being attacked via an optional infrared ‘staff attack’ facility
Monitors storage cupboards, cash offices and stock rooms for unauthorised access
Monitors doorbells, telephones and machinery for activation or failure
Sends notification of calls to hand-held paging equipment

Quick Enquiry

or call us on +44 (0) 1922 745024

0/250 Characters

Addressable Call System

Easy to install and expand multi-purpose addressable call system

Addressable Call System

Easy to install and expand multi-purpose addressable call system

Key Features

Cat No

Description

FPA-406

Recessing bezel to suit ONC-020 Controller

Cat No

Description

ONC-001

Slave Ceiling Pull Unit

Cat No

Description

ONC-002

Overdoor Light c/w Sounder

Cat No

Description

ONC-003

Call Point c/w Remote Socket & Button Reset

Cat No

Description

ONC-020

Call System Controller (requires 2 x 7Ah batteries)

Cat No

Description

ONC-021

Upload/Download Programming Software & Lead (Windows XP/Vista/7)

Cat No

Description

ONC-022

Corridor Display with Controls Also available for use on conventional and dementia care call systems

Cat No

Description

ONC-023

Corridor Display without Controls

Cat No

Description

ONC-024

Slave Overdoor Light Also available for use on conventional and dementia care call systems

Cat No

Description

ONC-025

Call Point c/w Remote Socket & Magnetic Reset

Cat No

Description

ONC-027

Call Point c/w Button Reset (Without Remote Socket)

Cat No

Description

ONC-028

Call Point c/w Magnetic Reset (Without Remote Socket)

Cat No

Description

ONC-029

Monitoring Point c/w Button Reset

Cat No

Description

ONC-030

Master Infrared Ceiling Receiver

Cat No

Description

ONC-031

Slave Infrared Ceiling Receiver

Cat No

Description

ONC-032

Mk2 (868MHz) Radio Receiver (Compatible with ONC-033 Transmitter Only)

Cat No

Description

ONC-033

Infrared/Radio Staff Attack Transmitter (Push/Pull for Attack) Also available for use on conventional and dementia care call systems

Cat No

Description

ONC-034

Single Way Charging Unit to suit ONC-033 Transmitter Also available for use on conventional call system

Cat No

Description

ONC-035

Corridor Display with Controls
_{Also available for use on conventional and dementia care call systems}

Slave Overdoor Light
_{Also available for use on conventional and dementia care call systems}

Infrared/Radio Staff Attack Transmitter (Push/Pull for Attack)
_{Also available for use on conventional and dementia care call systems}

Single Way Charging Unit to suit ONC-033 Transmitter
_{Also available for use on conventional call system}

Ten Way Charging Unit to suit ONC-033 Transmitter
_{Also available for use on conventional call system}

Infrared/Radio Transmitter (Push for Call/Pull for Attack)
_{Also available for use on conventional call system}

Hand/Foot Pneumatic Pad (Requires ONC-091)
_{Also available for use on conventional call system}

Remote Air Switch to suit ONC-090 (Connects to ONC-003, ONC-044 or ONC-046)
_{Also available for use on conventional call system}

Portable Movement Detector (Connects to ONC-003, ONC-044 or ONC-046)
_{Also available for use on conventional call system}

Double Remote Jack Socket (Allows 2 Ancillary Calling Devices to be Connected)
_{Also available for use on conventional call system}