Mains: All Lumens
Emergency: All Lumens
Weight: All Weights
Products     Fire     Two-Wire Fire Alarm Equipment     Two-Wire Fire Alarm Systems
Twin-Flex Pro Two-Wire Fire Alarm Panels & Devices
  • Panels
  • Available in 2, 4 and 8 zone panel versions
  • 4 line x 20 character LCD display
  • Ability to differentiate between call-point or detector alarms
  • Checkpoint alarm verification feature
  • Highlighted selection menu
  • Event log storing up to 500 events
  • 3 enhanced test modes
  • Allows detectors and sounders to be installed on the same pair of wires
  • Up to 32 devices per zone
  • Built-in end-of-line capability in all devices
  • 7 modes of detection (3 forms of smoke detection, 3 forms of heat detection and 1 combined smoke and heat detection)
  • Handy contractor kits available; consisting of a panel, 6 Multipoints, 2 call points and a head removal tool
  • 1 to 5 minute variable time alarm delay feature enabling investigation of the cause of activation, thus eliminating false alarms
  • IP30 V2 rated ABS construction
  • Multipoints
  • Three smoke detection modes/three heat detection modes
  • Modes can be changed before and after installation
  • Available with or without an integral 90dBA sounder
  • Compact and easy to install
  • Intelligent, microprocessor controlled detector
  • Continuous self-calibration
  • Fully encapsulated electronics
  • Call Points
  • Resettable element
  • Immediate full alarm when fire is detected in communal areas
  • Features an LED and 20mm entries as standard
  • Sounders & Strobes
  • Four tone settings
  • Anti-tamper feature
  • Bayonet locking device
Catalogue Numbers & Information
Fire Panels
Cat No Description Maximum Battery
FP-312* 2 zone Twin-Flex Pro two-wire panel 2 x 3.2Ah (FPA-071)
FP-313* 4 zone Twin-Flex Pro two-wire panel 2 x 3.2Ah (FPA-071)
FP-314* 8 zone Twin-Flex Pro two-wire panel 2 x 3.2Ah (FPA-071)
* Indicates LPCB certified product
Batteries to be ordered separately
Panel Accessories
Cat No Description
FPA-210 Spare access keys to suit Twin-Flex Pro two-wire panels (pack of 2)
Repeater Panel
Cat No Description
FPR-027* 8 zone Twin-Flex Pro repeater panel
* Indicates LPCB certified product
Repeater panel is not suitable for use with 2 zone control panels
Batteries to be ordered separately
Contractor Kits
Cat No Description Maximum Battery
FP-024* 2 zone Twin-Flex Pro contractor kit 2 x 3.2Ah (FPA-071)
FP-025* 4 zone Twin-Flex Pro contractor kit 2 x 3.2Ah (FPA-071)
FP-087* 4 zone Twin-Flex Pro contractor kit 2 x 3.2Ah (FPA-071)
* Indicates LPCB certified product
Contractor kits include 1 x panel, 6 x Multipoints, 1 x Multipoint/strobe, 2 call points and a detector head removal tool
Batteries to be ordered separately
Cat No Description
FPA-942 Multipoint Detector c/w Sounder & Strobe
FPA-1009* Multipoint Detector c/w Sounder
FPA-1010* Multipoint Detector
FPA-1016/ASD Detector Head Removal Tool
* Indicates LPCB certified product
Call Points
Cat No Description
FPA-755* Weatherproof Resettable Call Point
FPA-1011* Resettable Call Point
FPA-1011/COVER Protective Cover to suit FPA-1011 Call Point
FPA-1011/KEY Pack of 5 Spare Keys to suit FPA-1011 Call Point
* Indicates LPCB certified product
Sounders & Sounder Beacons
Cat No Description
FPA-040 Red 90dBA sounder & red LED beacon
FPA-041 IP55 red LED beacon
FPA-042 85dBA white square sounder
FPA-1013* Stand Alone Red Sounder
FPA-1014* Stand Alone White Sounder
FPA-1044* Combined Sounder and Beacon with Red Lens
FPA-1046* IP55 Industrial Horn Sounder
FPA-1047* Red Square Sounder
* Indicates LPCB certified product
Cat No Description
FPA-1015* Input/Output Module
* Indicates LPCB certified product
Control Panels: Width 331mm x Height 331mm x Depth 99mm
Repeater Panels: Width 331mm x Height 331mm x Depth 99mm
The FPA-304 short message communicator provides a cost-effective, easy-to-install solution for signalling alarm and other system conditions by sending a SMS text message to the user using GSM technology. The unit ensures that key people are contacted the moment there is a status change in the system, enabling fast incident response. Call our sales team now for further details.

The multipoint detector is the key to the Twin-Flex Pro system and offers 7 modes of detection in 1 device. The mode of detection is changed simply by configuring the DIL switch in the detector’s electronics module. The modes of detection are:

Smoke 1: Standard optical with high thermal enhancement for areas where fires need to be detected extremely quickly (typically used where ionisation detectors are normally fitted)

Smoke 2: Standard optical with normal thermal enhancement

Smoke 3: Low sensitivity optical with transient rejection. The reduced sensitivity linked with a time delay feature makes this setting ideal for use in areas that are prone to nuisance alarms

Heat 1: Used in normal, stable areas where a standard 58°C rate-of-rise heat detector would be used

Heat 2: 58°C fixed temperature heat (used in domestic kitchens)

Heat 3: 90°C fixed temperature heat (used in commercial kitchens and boiler rooms)

Smoked/Heat Combination: A combination of smoke 2 (optical) and heat 2 (58°C fixed temperature heat)
No downloads available