SEARCH PRODUCTS
Mains: All Lumens
Emergency: All Lumens
Weight: All Weights
Reset
Products     Lighting     Emergency Gear
  Back
LED Control Gear for Emergency Lighting
A range of LED emergency control gear designed to operate LED loads of 3V – 80V DC
Features
  • A range of LED emergency control gear designed to operate LED loads of 3V – 80V DC in maintained or non-maintained modes, in the event of a lighting circuit failure
  • Available in 3, 4 and 5 cell versions to suit most applications
  • Designed for use with NiCad or NiMH battery types
  • Incorporates switched live in/out facility for isolation of the LED load and mains driver power supply during emergency operation
  • Compatible with most LED drivers up to 60W – higher power drivers can be accommodated (contact our technical department for further information)
  • Suitable for use with external LED drivers
  • Designed and manufactured in accordance with BS EN61347-2-13 and BS EN62384
Catalogue Numbers & Information
LCMR380V General Specification
Cat No Light Source & Mode Mains
Lumens
Emergency Lumens Weight (kg)
LCMR380V Compatible with 3 x 4Ah battery cell - - 0.20
Input Voltage: 205V - 254V AC 50/60Hz
Emergency Duration: 3 Hours
Mode of Operation: Non-maintained / maintained (for use with external drivers)
Battery Type: Nickel Cadmium (NiCad) or Nickel Metal Hydride (NiMH)
Nominal Battery Voltage: 3.6V
Battery Capacity: 4Ah
Minimum LED Voltage (Vf): 3V dc
Maximum LED Voltage: 80V dc
Emergency LED Supply Current Range (If): 30mA - 250mA
LCMR480V General Specification
Cat No Light Source & Mode Mains
Lumens
Emergency Lumens Weight (kg)
LCMR480V Compatible with 4 x 4Ah battery cell - - 0.20
Input Voltage: 205V - 254V AC 50/60Hz
Emergency Duration: 3 Hours
Mode of Operation: Non-maintained / maintained (for use with external drivers)
Battery Type: Nickel Cadmium (NiCad) or Nickel Metal Hydride (NiMH)
Nominal Battery Voltage: 4.8V
Battery Capacity: 4Ah
Minimum LED Voltage (Vf): 3V dc
Maximum LED Voltage: 80V dc
Emergency LED Supply Current Range (If): 40mA - 300mA
LCMR580V General Specification
Cat No Light Source & Mode Mains
Lumens
Emergency Lumens Weight (kg)
LCMR580V Compatible with 5 x 4Ah battery cell - - 0.20
Input Voltage: 205V - 254V AC 50/60Hz
Emergency Duration: 3 Hours
Mode of Operation: Non-maintained / maintained (for use with external drivers)
Battery Type: Nickel Cadmium (NiCad) or Nickel Metal Hydride (NiMH)
Nominal Battery Voltage: 6V
Battery Capacity: 4Ah
Minimum LED Voltage (Vf): 3V dc
Maximum LED Voltage: 80V dc
Emergency LED Supply Current Range (If): 50mA - 350mA
Dimensions
Length 225mm x Width 44mm x Height 30mm (fixing centres 205mm)
Weight: 0.20Kg
Introduction
Orbik offer a range of LED emergency control gear to suit single or multiple LED lamps housed in a stylish, low profile, polycarbonate moulded enclosure.
Due to the extensive range of LED products currently available, it is becoming increasingly difficult to select suitable LED emergency control gear for LED lamps. In order to establish the correct emergency control gear for an LED application, two fundamental factors that can be located on the LED mains driver need to be determined:
LED driver output voltage (V-out) & LED driver output current (I-out)
If the V-out is less than 80V the LCMR range is suitable, however if the V-out is greater than 80V DC, please contact our technical department for further assistance.
Please see our guide "How to Select the Correct LED Module" in the DOWNLOADS section to choose a suitable LED conversion module and to calculate the estimated EBLF.
* BSI certification applied for
  Downloads
Please login or create a free account to view these documents.