SEARCH PRODUCTS
Mains: All Lumens
Emergency: All Lumens
Weight: All Weights
Reset
Products     Lighting     Emergency Gear
  Back
LED Control Gear for Central Systems
LED inverters for use with central systems
Features
  • Suitable for a wide range of single or multiple LED modules (arrays)
  • Output Voltage range 3V - 80V DC
  • Constant power output
  • Supplied as standard with a 240V AC hold off relay
  • IP20 polycarbonate housing
  • Class 2 protection
  • Supplied with strain relief cable clamps
  • Designed and manufactured in accordance with BS EN61347-2-13, BS EN62384 , BS EN55015, BS EN 61000-3-2 and BS EN61000-3-3
Catalogue Numbers & Information
LVR24 General Specifications
Cat No Light Source & Mode Mains
Lumens
Emergency Lumens Weight (kg)
LVR24 24V LED inverter - - 0.15
Low Voltage Input Supply: 24V AC/DC, AC ± 10%, DC +25% - 16%
Input Current (Load Dependant): 70mA - 520mA
Input Power (Load Dependant): 1.75W - 12W
Power Factor λ: >0.95
Hold-Off Relay Supply: 240V AC 50/60Hz
Output Voltage Range (DC): 3V - 80V
Enclosure: White polycarbonate
Wire Size: 1.5mm²
LVR50 General Specifications
Cat No Light Source & Mode Mains
Lumens
Emergency Lumens Weight (kg)
LVR50 50V LED inverter - - 0.15
Low Voltage Input Supply: 50V AC/DC, AC ± 10%, DC +25% - 16%
Input Current (Load Dependant): 36mA - 225mA
Input Power (Load Dependant): 1. 8W - 11.5W
Power Factor λ: >0.95
Hold-Off Relay Supply: 240V AC 50/60Hz
Output Voltage Range (DC): 3V - 80V
Enclosure: White polycarbonate
Wire Size: 1.5mm²
LVR110 General Specifications
Cat No Light Source & Mode Mains
Lumens
Emergency Lumens Weight (kg)
LVR110 110V LED inverter - - 0.15
Low Voltage Input Supply: 110V AC/DC AC ± 10% DC +25% - 16%
Input Current (Load Dependant): 18.5mA - 105mA
Input Power (Load Dependant): 1.95W - 11.5W
Power Factor λ: >0.95
Hold-Off Relay Supply: 240V AC 50/60Hz
Output Voltage Range (DC): 3V - 80V
Enclosure: White polycarbonate
Wire Size: 1.5mm²
LVR220 General Specifications
Cat No Light Source & Mode Mains
Lumens
Emergency Lumens Weight (kg)
LVR220 220V LED inverter - - 0.15
Low Voltage Input Supply: 220V AC/DC, AC ± 10%, DC +25% - 16%
Input Current (Load Dependant): 9mA - 50mA
Input Power (Load Dependant): TBC
Power Factor λ: >0.95
Hold-Off Relay Supply: 240V AC 50/60Hz
Output Voltage Range (DC): 3V - 80V
Enclosure: White polycarbonate
Wire Size: 1.5mm²
Dimensions
Length 168mm x Width 44mm x Height 30mm (fixing centres 148mm)
Weight: 0.15kg
Introduction
Designed and manufactured in our ISO9001 approved factory, this new range of energy saving LED inverters is suitable for 24,50,110 and 220v AC/DC central systems.
Their design incorporates high quality, fully approved components from approved suppliers, and these inverters are supplied as standard in a compact IP20 polycarbonate housing, suitable for use with many LED luminaires operating from a central system.
This impressive range of LED inverters can allow the mains luminaires the option of night-light operation for use with CCTV systems.
The design of the 220v AC/DC version offers a more efficient and universal distribution of emergency lighting ,resulting in cost effective and energy saving lower power systems required
These notes are to be used as a guide only and are subject to change. For up-to-date product information and for all other enquiries or assistance, please contact our technical department at technical@orbik.co.uk.
  Downloads
No downloads available