Arrian

Darwin

Kandel

LED Control Gear for Emergency Lighting

Nickel Cadmium Batteries

Nickel Metal Hydride Batteries

Single & Multiple Array LED Mains Drivers

LED Control Gear for Central Systems

Fluorescent Central System Inverters

CBU AC/DC Central Battery Systems

LPAC Single Phase Static Inverters

HPAC Single Phase Static Inverters

HPAC Three Phase Static Inverters

Mini Sine Compact Static Inverter

Change-Over & Sub-Circuit Monitor Relay

CFP Fire Alarm Panels

Series 65 Detectors

Hochiki CDX Detectors

Vision Detectors

Optical Beam Smoke Detectors

Valve-Regulated Lead Acid Batteries

Electromagnetic Door Retainers

Fire & Safety Signage

Twin-Flex Pro Fire Alarm Panels

Twin-Flex Pro Ancillaries

CFP Two-Wire Fire Alarm Panels

AlarmSense® Two-Wire Devices

XFP Fire Alarm Panels

MxPro5 Fire Alarm Panels

CIE-A 200 Fire Alarm Panel

Hush Button

Sentri Addressable Devices

Sita Devices

XP95® Addressable Devices

Discovery® Addressable Devices

Xpander® Addressable Devices

Hochiki ESP Intelligent Addressable Devices

Zerio Plus Fire Alarm Panels

Zerio Plus Wireless Devices

Disabled Toilet Alarms

Loop-Wired Disabled Refuge System

Conventional Call System

Addressable Call System

Stainless Steel Ancillaries

Dementia Care System

Induction Loop Systems

Gas Suppression Equipment

Intrinsically Safe Solutions

Fire-Cryer® Voice Alarms

Titanus® Air Sampling Smoke Detection

Window Ventilation Systems

Linear Heat Detection

Water Leakage Detection

HPAC Single Phase Static Inverters

BSI-certified static inverter systems that meet European Emergency Lighting regulations

HPAC Single Phase Static Inverters

BSI-certified static inverter systems that meet European Emergency Lighting regulations

Enquire Now

Key Features

True double-conversion and PWM technology
Inverter stage output Galvanic isolation transformer included
Capable of 120% continuous overload to meet European Emergency Lighting regulations
Parallel mode operation (optional) (hot standby, redundant, symmetric parallel)
Larger 20 Amp charger for faster recharge of batteries
Maintenance by-pass (for complete isolation of the inverter during maintenance)
Unique Inverter design to suit high inrush lighting loads
Bypass to load (changeover mode) user selection
LCD panel providing accurate detailed information about the Load, Batteries and Inverter with advanced diagnostics.
3 Microprocessors; main control board, rectifier board, optional parallel control board
Real time clock and calendar indicator
64 Recorded real-time events history
RS232 and dry contacts for communication and remote monitoring
Designed and manufactured under ISO9001 certification

Variants

Ordering Information

Cat No Output Rating KvA Output Rating Kw Power Factor Serial Communication Protection Degree Operating Temp. (Ambient) Standard Ventilation Altitude Relative Humidity Acoustic Noise at 1m Voltage/Tolerance Bypass Voltage Input Frequency Maximum RFI Output Voltage Voltage Stability Voltage Recovery Time Frequency Frequency Tolerance Efficiency at 100% Load Crest Factor Short Circuit Protection Overload Capacity Total Harmonic Distortion Battery Type Number of 12V Blocks Float Charging Value End of Discharge Voltage Battery Charging Characteristics Battery Ambient Temperature Automatic Battery Test Battery Protection Dimensions W x D x H (mm) Weight (Kg)	HPAC4 4 3.2 0.8 Dry contacts plus RS232 IP41 0-40°C Emergency lighting EN50171 Forced air cooling <1000 Metres (above sea level) 90% maximum (non-condensing) <56 dBA 230Vac single phase, 4 wires + ground / ± 15% 230Vac single phase 50Hz ± 5% (60Hz to order) EN 50091-2 class A 230Vac single phase Static (balanced load) ± 1% Static (unbalanced load) ± 2% Dynamic (step load 0-100%) ± 5% After step load 0-100% maximum 20ms 50Hz (60Hz to order) Line synchronised ± 1% Free running ± 0.2% >87-91% 3:1 Electronic short circuit 120% continuous, 150% load 10 minutes, 180% load 1 minute, 200% load for 1 second Linear load <3% Non-linear load 75% NP and CF 3:1) <5% Sealed lead acid - maintenance free 16 216Vdc 160Vdc Electronic short circuit 25°C Weekly Circuit breaker 300 x 500 x 1220 85
Cat No Output Rating KvA Output Rating Kw Power Factor Serial Communication Protection Degree Operating Temp. (Ambient) Standard Ventilation Altitude Relative Humidity Acoustic Noise at 1m Voltage/Tolerance Bypass Voltage Input Frequency Maximum RFI Output Voltage Voltage Stability Voltage Recovery Time Frequency Frequency Tolerance Efficiency at 100% Load Crest Factor Short Circuit Protection Overload Capacity Total Harmonic Distortion Battery Type Number of 12V Blocks Float Charging Value End of Discharge Voltage Battery Charging Characteristics Battery Ambient Temperature Automatic Battery Test Battery Protection Dimensions W x D x H (mm) Weight (Kg)	HPAC5 5 4 0.8 Dry contacts plus RS232 IP41 0-40°C Emergency lighting EN50171 Forced air cooling <1000 Metres (above sea level) 90% maximum (non-condensing) <56 dBA 230Vac single phase, 4 wires + ground / ± 15% 230Vac single phase 50Hz ± 5% (60Hz to order) EN 50091-2 class A 230Vac single phase Static (balanced load) ± 1% Static (unbalanced load) ± 2% Dynamic (step load 0-100%) ± 5% After step load 0-100% maximum 20ms 50Hz (60Hz to order) Line synchronised ± 1% Free running ± 0.2% >87-91% 3:1 Electronic short circuit 120% continuous, 150% load 10 minutes, 180% load 1 minute, 200% load for 1 second Linear load <3% Non-linear load 75% NP and CF 3:1) <5% Sealed lead acid - maintenance free 18 243Vdc 180Vdc Electronic short circuit 25°C Weekly Circuit breaker 300 x 500 x 1220 95
Cat No Output Rating KvA Output Rating Kw Power Factor Serial Communication Protection Degree Operating Temp. (Ambient) Standard Ventilation Altitude Relative Humidity Acoustic Noise at 1m Voltage/Tolerance Bypass Voltage Input Frequency Maximum RFI Output Voltage Voltage Stability Voltage Recovery Time Frequency Frequency Tolerance Efficiency at 100% Load Crest Factor Short Circuit Protection Overload Capacity Total Harmonic Distortion Battery Type Number of 12V Blocks Float Charging Value End of Discharge Voltage Battery Charging Characteristics Battery Ambient Temperature Automatic Battery Test Battery Protection Dimensions W x D x H (mm) Weight (Kg)	HPAC6 6 4.8 0.8 Dry contacts plus RS232 IP41 0-40°C Emergency lighting EN50171 Forced air cooling <1000 Metres (above sea level) 90% maximum (non-condensing) <56 dBA 230Vac single phase, 4 wires + ground / ± 15% 230Vac single phase 50Hz ± 5% (60Hz to order) EN 50091-2 class A 230Vac single phase Static (balanced load) ± 1% Static (unbalanced load) ± 2% Dynamic (step load 0-100%) ± 5% After step load 0-100% maximum 20ms 50Hz (60Hz to order) Line synchronised ± 1% Free running ± 0.2% >87-91% 3:1 Electronic short circuit 120% continuous, 150% load 10 minutes, 180% load 1 minute, 200% load for 1 second Linear load <3% Non-linear load 75% NP and CF 3:1) <5% Sealed lead acid - maintenance free 18 243Vdc 180Vdc Electronic short circuit 25°C Weekly Circuit breaker 300 x 500 x 1220 110
Cat No Output Rating KvA Output Rating Kw Power Factor Serial Communication Protection Degree Operating Temp. (Ambient) Standard Ventilation Altitude Relative Humidity Acoustic Noise at 1m Voltage/Tolerance Bypass Voltage Input Frequency Maximum RFI Output Voltage Voltage Stability Voltage Recovery Time Frequency Frequency Tolerance Efficiency at 100% Load Crest Factor Short Circuit Protection Overload Capacity Total Harmonic Distortion Battery Type Number of 12V Blocks Float Charging Value End of Discharge Voltage Battery Charging Characteristics Battery Ambient Temperature Automatic Battery Test Battery Protection Dimensions W x D x H (mm) Weight (Kg)	HPAC8 8 6.4 0.8 Dry contacts plus RS232 IP41 0-40°C Emergency lighting EN50171 Forced air cooling <1000 Metres (above sea level) 90% maximum (non-condensing) <56 dBA 230Vac single phase, 4 wires + ground / ± 15% 230Vac single phase 50Hz ± 5% (60Hz to order) EN 50091-2 class A 230Vac single phase Static (balanced load) ± 1% Static (unbalanced load) ± 2% Dynamic (step load 0-100%) ± 5% After step load 0-100% maximum 20ms 50Hz (60Hz to order) Line synchronised ± 1% Free running ± 0.2% >87-91% 3:1 Electronic short circuit 120% continuous, 150% load 10 minutes, 180% load 1 minute, 200% load for 1 second Linear load <3% Non-linear load 75% NP and CF 3:1) <5% Sealed lead acid - maintenance free 20 270Vdc 200Vdc Electronic short circuit 25°C Weekly Circuit breaker 300 x 500 x 1220 125
Cat No Output Rating KvA Output Rating Kw Power Factor Serial Communication Protection Degree Operating Temp. (Ambient) Standard Ventilation Altitude Relative Humidity Acoustic Noise at 1m Voltage/Tolerance Bypass Voltage Input Frequency Maximum RFI Output Voltage Voltage Stability Voltage Recovery Time Frequency Frequency Tolerance Efficiency at 100% Load Crest Factor Short Circuit Protection Overload Capacity Total Harmonic Distortion Battery Type Number of 12V Blocks Float Charging Value End of Discharge Voltage Battery Charging Characteristics Battery Ambient Temperature Automatic Battery Test Battery Protection Dimensions W x D x H (mm) Weight (Kg)	HPAC12 12.5 10 0.8 Dry contacts plus RS232 IP41 0-40°C Emergency lighting EN50171 Forced air cooling <1000 Metres (above sea level) 90% maximum (non-condensing) <56 dBA 230Vac single phase, 4 wires + ground / ± 15% 230Vac single phase 50Hz ± 5% (60Hz to order) EN 50091-2 class A 230Vac single phase Static (balanced load) ± 1% Static (unbalanced load) ± 2% Dynamic (step load 0-100%) ± 5% After step load 0-100% maximum 20ms 50Hz (60Hz to order) Line synchronised ± 1% Free running ± 0.2% >87-91% 3:1 Electronic short circuit 120% continuous, 150% load 10 minutes, 180% load 1 minute, 200% load for 1 second Linear load <3% Non-linear load 75% NP and CF 3:1) <5% Sealed lead acid - maintenance free 20 270Vdc 200Vdc Electronic short circuit 25°C Weekly Circuit breaker 300 x 500 x 1220 155
Cat No Output Rating KvA Output Rating Kw Power Factor Serial Communication Protection Degree Operating Temp. (Ambient) Standard Ventilation Altitude Relative Humidity Acoustic Noise at 1m Voltage/Tolerance Bypass Voltage Input Frequency Maximum RFI Output Voltage Voltage Stability Voltage Recovery Time Frequency Frequency Tolerance Efficiency at 100% Load Crest Factor Short Circuit Protection Overload Capacity Total Harmonic Distortion Battery Type Number of 12V Blocks Float Charging Value End of Discharge Voltage Battery Charging Characteristics Battery Ambient Temperature Automatic Battery Test Battery Protection Dimensions W x D x H (mm) Weight (Kg)	HPAC20/SP 20 14 0.8 Dry contacts plus RS232 IP41 0-40°C Emergency lighting EN50171 Forced air cooling <1000 Metres (above sea level) 90% maximum (non-condensing) <56 dBA 230Vac single phase, 4 wires + ground / ± 15% 230Vac single phase 50Hz ± 5% (60Hz to order) EN 50091-2 class A 230Vac single phase Static (balanced load) ± 1% Static (unbalanced load) ± 2% Dynamic (step load 0-100%) ± 5% After step load 0-100% maximum 20ms 50Hz (60Hz to order) Line synchronised ± 1% Free running ± 0.2% >87-91% 3:1 Electronic short circuit 120% continuous, 150% load 10 minutes, 180% load 1 minute, 200% load for 1 second Linear load <3% Non-linear load 75% NP and CF 3:1) <5% Sealed lead acid - maintenance free 26 354Vdc 260Vdc Electronic short circuit 25°C Weekly Circuit breaker TBC TBC

Use basic catalogue number, e.g. HPAC8
Add suffix /3 for standard 3 hour duration (systems for 1 hour duration can be manufactured to order, add suffix /1)
Example ordering code is now HPAC8/3 (8kVA single phase static inverter system for 3 hours duration)

Specification / Technical Information

Models incorporating any of the following options are manufactured to order

Increased power with parallel operation
Increased reliability with 1+1 redundant operation
Additional battery modules for extension of autonomy
Wide Area Network management via SNMP.
Remote monitoring panel RM-2000
Modbus connection for interface with BMS Systems
Input / output customisation

Quick Enquiry

or call us on +44 (0) 1922 745024

0/250 Characters

HPAC Single Phase Static Inverters

BSI-certified static inverter systems that meet European Emergency Lighting regulations

HPAC Single Phase Static Inverters

BSI-certified static inverter systems that meet European Emergency Lighting regulations

Key Features

Cat No

Output Rating KvA

Output Rating Kw

Power Factor

Serial Communication

Protection Degree

Operating Temp. (Ambient)

Standard

Ventilation

Altitude

Relative Humidity

Acoustic Noise at 1m

Voltage/Tolerance

Bypass Voltage

Input Frequency

Maximum RFI

Output Voltage

Voltage Stability

Voltage Recovery Time

Frequency

Frequency Tolerance

Efficiency at 100% Load

Crest Factor

Short Circuit Protection

Overload Capacity

Total Harmonic Distortion

Battery Type

Number of 12V Blocks

Float Charging Value

End of Discharge Voltage

Battery Charging Characteristics

Battery Ambient Temperature

Automatic Battery Test

Battery Protection

Dimensions W x D x H (mm)

Weight (Kg)

HPAC4

4

3.2

0.8

Dry contacts plus RS232

IP41

0-40°C

Emergency lighting EN50171

Forced air cooling

<1000 Metres (above sea level)

90% maximum (non-condensing)

<56 dBA

230Vac single phase, 4 wires + ground / ± 15%

230Vac single phase

50Hz ± 5% (60Hz to order)

EN 50091-2 class A

230Vac single phase

Static (balanced load) ± 1% Static (unbalanced load) ± 2% Dynamic (step load 0-100%) ± 5%

After step load 0-100% maximum 20ms

50Hz (60Hz to order)

Line synchronised ± 1% Free running ± 0.2%

>87-91%

3:1

Electronic short circuit

120% continuous, 150% load 10 minutes, 180% load 1 minute, 200% load for 1 second

Linear load <3% Non-linear load 75% NP and CF 3:1) <5%

Sealed lead acid - maintenance free

16

216Vdc

160Vdc

Electronic short circuit

25°C

Weekly

Circuit breaker

300 x 500 x 1220

85

Cat No

Output Rating KvA

Output Rating Kw

Static (balanced load) ± 1%
Static (unbalanced load) ± 2%
Dynamic (step load 0-100%) ± 5%

Line synchronised ± 1%
Free running ± 0.2%

Linear load <3%
Non-linear load 75% NP and CF 3:1) <5%

Static (balanced load) ± 1%
Static (unbalanced load) ± 2%
Dynamic (step load 0-100%) ± 5%

Line synchronised ± 1%
Free running ± 0.2%

Linear load <3%
Non-linear load 75% NP and CF 3:1) <5%